Mount your solar panel in a position that will enable the most amount of light to be absorbed (refer to Step 1 on page 2). In the Northern Hemisphere this is usually south facing.

The solar panel can charge the internal batteries in direct and indirect light. For best results, try to optimize your solar panel’s sun exposure.

At this point there are no extensions available for the cable that connects the light to the solar panel. Any additions to the cable will void the warranty.

A rapidly flashing light is caused by undercharged batteries. Turn the solar motion light to the “OFF” position and charge for two full sunny days to bring the battery to full charge. After two days, return the switch to the “Auto” position.

Yes, the sensor of the solar motion light is light-sensitive. For nighttime usage, ensure no other light activates the motion sensor.

Your solar motion light requires the use of one rechargeable 3.7V Lithium-ion battery, 1800 mAh.

Yes, this solar motion light comes with a 1-year limited warranty.